Amped Wireless Setup

Amped Wireless Setup installation using www.setup.ampedwireless.com. Dashboard gives you easy access to customize your Amped wireless settings. Changing amped wireless name or password can be done here. Amped Firmware upgrade is important to improve its performance. Access Amped wireless admin page or reset amped settings to default steps are available here.

Installation

Amped setup page www.setup.ampedwireless.com 192.168.1.240 / 192.168.3.1

Support

Chat assistance 24/7
Get your solution by expert within 3 Minutes

Community

Join amped community to access all new updates & News about amped devices.

Troubleshooting

Every possible solutions for amped wireless devices. Read or post your issues and solutions.

Amped Wireless Setup using www.setup.ampedwireless.com

Cannot Login Amped Wireless Setup page

Login issues with AmpedĀ  setup page can only occurs due to some reasons below:-

  1. You are not connected to amped wireless device.
  2. Amped Firmware is not updated.
  3. Amped web interface is not responding. Use Default IP address instead.
  4. You don’t know the admin login password.
  5. Amped extender is not configured completely.

Solutions-

  1. Make sure you are connected to amped wireless network or hardwire to your PC.
  2. Whether or whether not you have internet, you can access Amped setup page for manual setup.
  3. Use default IP address if www.setup.ampedwireless.com is not working.
  4. You can always reset admin settings on amped wireless device.

Important information for Log in www.setup.ampedwireless.com

amped wireless setup
  • Amped Wireless router setup page URL- www.setup.ampedwireless.com
  • Default amped router IP Address -192.168.3.1
  • SSID(WiFi Name)-Amped_Network
  • Amped router admin password- admin
amped wireless setup

Amped wireless Range Extender setup

  • Amped Wireless extender setup page URL- www.setup.ampedwireless.com
  • Default amped extender IP Address -192.168.1.240
  • SSID(WiFi Name)-Amped_Network
  • Amped extender admin password- admin
amped wireless setup

Amped access point setup

  • Amped Wireless router setup page URL- www.setup.ampedwireless.com
  • Default amped access point IP Address -http://192.168.1.240
  • SSID(WiFi Name)-Amped_AP
  • Amped router admin password- admin